INDEX SUSPENSION Billet HD 1.25” Top Hat for Gen 3 Raptor (2021-current)
Sold in pairs. The index suspension level system was design to designed to provide 1.25" of lift (neither too little nor too much) while improving tire to the wheel well clearance at full compression. The Index Suspension top hat is compatible with all gen 3 Raptors including 37PP and R trucks and Compared to a 1.5” perch collar that loads the coil with 1.5” of preload, this top hat is optimized to provide a factory like ride quality by only preloading the coil to .25” AND achieves the extra 1” of height and tire clearance by adding thickness to the oem top hat. The more preload, the more force required to compress the shock, consequently causing dramatic changes to the ride quality. These changes are most noticeable when driving over sharp edges likes man hole covers/ pot holes/rail road tracks etc.
Unlike just putting a spacer under the bumper stop, there is zero lost travel and minimal added preload with this option. This allows your shock to make use of the bypass zones it was originally designed around. This is intended to be used in conjunction with our eyelet, bump stop spacer, and spring spacer, but can be run independently as well if you're just looking for a level.
The fit and finish of the Index Suspension top hats is in on par with OE equipment, if not cleaner. This might just be the most refined top hat you come across. Pressed knurled studs to bolt to the shock tower, heavy duty rubber bushing to resist salt and grime on mountain passes, heavy duty stainless retaining ring holding the bushing in place, and comes with hardware equivalent to factory spec. This is a part that can be daily driven in harsh conditions that eat through some aftermarket parts. The mountain passes around us destroy steel uniballs. One season of snowmobiles and skis is about all they've got in them, so we opted for the longevity of rubber bushings. Not to mention uniballs are not intended to be loaded axially.
Specifications:
- Improved tire clearance at full compression to help fit 37s with ease
- 1.25" lift
- 14" of travel maintained
- Includes high strength hardware that matches factory specs
- Compatible with all gen 3 Raptors
- Material: 6061-T6
- Made in the USA